Pot Lid Taming Options:

• Use the spring-tension curtain rods! Run them front-to-back in the drawer to make dividers.
• If your drawer is deep enough for the lid to be stored standing up on its edge, buy 1/2″ dowling. Cut the length of the inside of your drawer, front to back, plus 1/2 inch. Measure the thickness of the lid(s). Add 1/8″. Drill 1/4″ deep holes (that are a hair over 1/2″ diameter) on the front and back of the drawer. These holes should be the thickness-of-lid-plus-1/8″ from the side. Pop dowel into holes. Presto….a lid-holding-rod on the side.

These two techniques also work great in all skinny cabinets that you use to store cookie sheets and cutting boards…..

Enjoy!